Ai-Tek Fiber Media Converter 10/100Base-Tx to 100Base-Fx with 1 Fiber Port + 1 RJ45 Ports (Pair)
AI-Tek

Ai-Tek Fiber Media Converter 10/100Base-Tx to 100Base-Fx with 1 Fiber Port + 1 RJ45 Ports (Pair)


SKU #: AI900W-FE-20-T

  • 10/100Mbps
  • Rs 3,200

    Shippment Time: Two Working Days
Rs
Facebook Twitter

10/100 Rate Converting to Fiber Media Converters transparently connect 10/100 Ethernet to fiber. 10/100 converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices

Network Administrators can "see-everything" with  the advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Remote Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make our 10/100 ethernet media converters the smart choice for IT professionals.

 

Features:
Optical Port: 100Mbps, Single SC Multi-mode fiber, support 100M Ethernet.

RJ45 Port: CAT5E/CAT6 10M/100M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover.

128 K's data buffer RAM 
Support for low-delay time pure data transmission and full/half-duplex flow control
Built-in watch-dog timer to monitor any error in internal data exchange

Complies with IEEE IEEE 802.3/802.3u/802.3af.

Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status.


Interface:
1 x Ethernet port (RJ45) 10/100Base-Tx
1 x Optical port (Single SC) 100Base-Fx

Optical Port:
1310nm Multi mode
Transfer Distance: up to 25km
Connectors: Single SC connector
Fiber core: 8.3um, 8.7um, 9um and 10um on single mode fiber
Optical Power (dBm): -15~ -8
Receiving Sensitivity (dBm): ≤-34

Ethernet Port:
Standard: IEEE 802.3, IEEE 802.3u
Available speed: auto-detective 10/100Mbps Full-Duplex and Half-Duplex auto-negotiation
Connectors: RJ-45 connector; MDI/MDI-X connection auto-sensing

LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 100Mbps, while “OFF” means the rate is 10 Mbps
TX: Light on when TP speed is 100Mbps, while “OFF” means the rate is 10 Mbps
Link/ACT: Left side is indicate for fiber port link/act and right side for TP,light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active,light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off

Power Requirement:
Output voltage: DC5V, 2A


Environmental Limits:
Operating Temperature: 0°C to 60°C
Storage Temperature: -20°C to 70°C
Humidity: 5% to 90% RH

Physical Characteristics:

Housing: Metal enclosure

Volume: 98x70x25mm

Net Weight: 238g/pair


Checklist:
Before you installing the Converter,verify that the package contains the following:
1.The Ethernet Media Converters
2.AC/DC Power Adapter