Ubiquiti UniFi nanoHD is a 4x4 MU-MIMO 802.11ac Wave2 Access Point. It runs on 2.4 GHz (300Mbps max PHY rate), 4x4 MU-MIMO on 5GHz (1733Mbps max PHY rate). It also comes with the same mount as the UAP-AC-Lite. It combines the performance increase from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nano HD AP delivers up to 125x greater performance than a typical Wave 1AP
| UAP-HD-NANO | |
|---|---|
| Dimensions | 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29") |
| Weight With Mounting Kits | 300 g (10.6 oz) 315 g (11.1 oz) |
| Networking Interface | (1) RJ45 GbE |
| Buttons | (1) Reset to Defaults |
| Power Method | 802.3af |
| Power Supply | UniFi Switch (PoE) |
| Max. Power Consumption | 10.5W |
| Operating Frequency | 2.4 GHz 5 GHz |
| Max. TX Power 2.4 GHz 5 GHz | 23 dBm 26 dBm |
| Antenna Gain 2.4 GHz 5 GHz | 2.8 dBi 3 dBi |
| MIMO 2.4 GHz 5 GHz | 2x2 4x4 |
| Throughput 2.4GHz 5GHz | 300 Mbps 1733 Mbps |
| Wi-Fi Standards | 802.11 a/b/g/n/ac/ac-wave2 |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| BSSID | 8 per Radio |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
Ubiquiti nanoHD Access Point Data Sheet
Ubiquiti nanoHD Access Point Quick Start Guide
This product has no reviews.
Let others know what do you think and be the first to write a review.
Sign In
