Ubiquiti UniFi AP-NanoHD

Ubiquiti UAP-nanoHD Unifi nanoHD 802.11ac 2.4/5GHz Wave2
Ubiquiti UniFi nanoHD is a 4×4 MU-MIMO 802.11ac Wave2 Access Point. It runs on 2.4 GHz (300Mbps max PHY rate), 4×4 MU-MIMO on 5GHz (1733Mbps max PHY rate). It also comes with the same mount as the UAP-AC-Lite. It combines the performance increase from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi nano HD AP delivers up to 125x greater performance than a typical Wave 1AP

UAP-HD-NANO
Dimensions 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29″)
Weight
With Mounting Kits 300 g (10.6 oz)
315 g (11.1 oz)
Networking Interface (1) RJ45 GbE
Buttons (1) Reset to Defaults
Power Method 802.3af
Power Supply UniFi Switch (PoE)
Max. Power Consumption 10.5W
Operating Frequency 2.4 GHz
5 GHz
Max. TX Power
2.4 GHz
5 GHz
23 dBm
26 dBm
Antenna Gain
2.4 GHz
5 GHz
2.8 dBi
3 dBi
MIMO
2.4 GHz
5 GHz
2×2
4×4
Throughput
2.4GHz
5GHz
300 Mbps
1733 Mbps
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
Product Documentation

Ubiquiti nanoHD Access Point Data Sheet
Ubiquiti nanoHD Access Point Quick Start Guide