Ubiquiti UAP-nanoHD Unifi nanoHD 802.11ac 2.4/5GHz Wave2 Ubiquiti UniFi nanoHD is a 4×4 MU-MIMO 802.11ac Wave2 Access Point. It runs on 2.4 GHz (300Mbps max PHY rate), 4×4 MU-MIMO on 5GHz (1733Mbps max PHY rate). It also comes with the same mount as the UAP-AC-Lite. It combines the performance increase from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi nano HD AP delivers up to 125x greater performance than a typical Wave 1AP   UAP-HD-NANO Dimensions 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29″) Weight With Mounting Kits 300 g (10.6 oz) 315 g (11.1 oz) Networking Interface (1) RJ45 GbE Buttons (1) Reset to Defaults Power Method 802.3af Power Supply UniFi Switch (PoE) Max. Power Consumption 10.5W Operating Frequency 2.4 GHz 5 GHz Max. TX Power 2.4 GHz 5 GHz 23 dBm 26 dBm Antenna Gain 2.4 GHz 5 GHz 2.8 dBi 3 dBi MIMO 2.4 GHz 5 GHz 2×2 4×4 Throughput 2.4GHz 5GHz 300 Mbps 1733 Mbps Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2 Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) BSSID 8 per Radio Mounting Wall/Ceiling (Kits Included) Operating Temperature -10 to 70° C (14 to 158° F) Operating Humidity 5 to 95% Noncondensing Certifications CE, FCC, IC Product Documentation Ubiquiti nanoHD Access Point Data Sheet Ubiquiti nanoHD Access Point Quick Start Guide